How to Clean Jack Lalanne Power Juicer?

If you are an individual who is into the world fitness, then you must recognize the name, Jack Lalanne. Also referred to as the pioneer fitness superhero or the Godfather of modern fitness Jack Lalanne has inspired several individuals across the globe when it comes to living healthier and fitter lives. His nutritional, as well as physical cultures, have aid in changing ways in which people perceive fitness.

 

Since the founding of the brand in 2002, Jack Lalanne juicers’ lines have become one of the commonly used and most favorable brands in today’s market. Individuals who own a Jack Lalanne power juicer will tell you how effective and easy to clean it is. In this article, we shall be discussing how to clean a Jack Lalanne power juicer.

Steps to clean Jack Lalanne power juicer

As previously mentioned cleaning Jack Lalanne power juicer is relatively easy. Furthermore, by reading Jack Lalanne’s manual, you will find cleaning the juicer to be much more comfortable. There are several models of Jack Lalanne juicers available in the market, and their cleaning process might differ slightly. In order to make the cleaning process much more comfortable, it will be best for you to clean the juicer immediately after use; this will aid in preventing the pulp and juice from drying.

Always clean the juicer after using it to aid in making the cleaning process much easier. However, if you have to, it will be best to get rid of removable parts and soak them in water after use. The hardest part of cleaning Jack Lalanne power juicer is the cutting disk and the strainer.

 

You will require a special tool to aid in disassembling these parts; nevertheless, this is considered to be an unnecessary step. Once you have disassembled the juicer you should always take care of the removable parts since when they get lost, you will not be able to assemble your juicer once again.

Cleaning up juicer

The cleaning process of the juicer is much more comfortable. The best part is that all the removable parts are dishwasher safe apart from the motor base. However, you should consider avoiding foreign and commercial dishwashers that may have high internal temperatures than what is meant for use back at home. You should remember that high temperatures can damage your juicer; therefore, you should consider checking on Jack Lalanne’s manual book to know the right temperature. Here are the critical steps to follow

Step 1

Turn off the power switch before disassembling your juicer and then wait until the motor comes to a stop before unplugging the AC cord from the socket.

 

 

Step 2

On the second step, you will have to disassemble your Jack Lalanne power juicer. You should then set all the removable parts on a clean paper towel. Here are the critical steps you will need to follow when disassembling it:

Step 3

In this step, you will have to wet a sponge or a cloth until it becomes damp and then clean the base of the juicer carefully and gently. You should not spray the base using water or submerge it in water. Furthermore, using harsh cleaners or sponges can cause damage to the finish; you should, therefore, do it gently.

 

Step 4

In this step you should fill the sink or the tub with warm soapy water. During this process you might consider using mild dish detergent. Wash and clean all the removable parts of your juicer and then rinse and clean it using clean water before drying it thoroughly. You might as well consider putting these parts in a dishwasher. Always check on the manual book and ensure that these parts are dishwasher safe.

 

Step 5

Rinse the blade and filter using warm water and use bristle dishwashing brush that will aid in cleaning them. You might as well consider using a spray hose attachment.

 

Step 6

Once all the parts are well cleaned and dry, you should put the juicer back together. Ensure the receptacle is installed on the base before putting the filter back. To put back the blade, you should consider using the crescent tool and then twist it clockwise in order to lock it. Put back the pulp collector along with the lid onto the base. Once this is done, raise the locking bar and then put the pusher back on to the top of the lid.

 

Step 7

With your juicer perfectly assembled, you might plug it in and turn on the switch power in order to get rid of the excess water that was left.

 

Step 8

The Jack Lalanne power juicer will be thoroughly cleaned; therefore, store it in a cool and dry place.

Final verdict

Always rinse your power juicer after use in order to prevent the juice and pulp from drying in your juicer, this will make it easier to clean. As we conclude, we hope that you will find it easy to clean your power juicer with the utmost ease.

Leave a Comment